UNIOR Torque wrench Art.264 3/8'' 5-110 Nm (615486)
Specifications Size : 3/8" 5-110 Nm Unior code : 615486 Bi-directional head : Equipped with a bi-directional head for......Prikaži več
Hitro in varno nakupovanje
Brezplačna dostava po Sloveniji nad 100eur
Možnost vračila v 14 dneh
Description
Specifications
Size : 3/8" 5-110 Nm
Unior code : 615486
Bi-directional head : Equipped with a bi-directional head for multi-sided use.
Torque Operation: The torque wrench operates in one direction and you must follow the marking on the wrench that shows the correct direction of torque operation.
Ratchet : The ratchet of a torque wrench works both clockwise and counterclockwise.
Suitable for screws and nuts : Can be used for screws and nuts with right-hand thread.
Audible signal: When the set moment is reached, an audible signal is triggered for your easier orientation.
Calibration : The default torque wrench calibration interval is 12 months or 5,000 torque measurements, in accordance with the ISO 6789 standard.
Scale : Dual scale in Nm and Kgm for easier use.
Use: Use the torque wrench only for tightening! Never use for unwinding.
Tightening direction : Tighten only in the direction marked on the wrench label, which indicates the correct direction.
Calibration: Maintain the default calibration interval of 12 months or 5,000 torque measurements from the date of purchase.
After use : After each use of the tool, release the measuring mechanism to the initial position.
Caution : When the required torque is reached, immediately stop applying additional force, otherwise the torque wrench may be damaged.
Size : 3/8" 5-110 Nm
Unior code : 615486
Bi-directional head : Equipped with a bi-directional head for multi-sided use.
Torque Operation: The torque wrench operates in one direction and you must follow the marking on the wrench that shows the correct direction of torque operation.
Ratchet : The ratchet of a torque wrench works both clockwise and counterclockwise.
Suitable for screws and nuts : Can be used for screws and nuts with right-hand thread.
Audible signal: When the set moment is reached, an audible signal is triggered for your easier orientation.
Calibration : The default torque wrench calibration interval is 12 months or 5,000 torque measurements, in accordance with the ISO 6789 standard.
Scale : Dual scale in Nm and Kgm for easier use.
Use: Use the torque wrench only for tightening! Never use for unwinding.
Tightening direction : Tighten only in the direction marked on the wrench label, which indicates the correct direction.
Calibration: Maintain the default calibration interval of 12 months or 5,000 torque measurements from the date of purchase.
After use : After each use of the tool, release the measuring mechanism to the initial position.
Caution : When the required torque is reached, immediately stop applying additional force, otherwise the torque wrench may be damaged.
