Hitro in varno nakupovanje
Brezplačna dostava po Sloveniji nad 100eur
Možnost vračila v 14 dneh
Description
Usage:
The surface must be clean, dry and degreased. Unstable particles of varnish and corrosion should be cleaned with a wire brush. The converter is applied with a brush or roller, make sure that the paint does not run over the other surfaces. The treated surface must be repainted within 48 hours. Reaction time 3h. Other surfaces must be protected from coating. After application, do not rinse the surface with water.
Suitable for painting
• Can be repainted after 3 hours with all commercially available topcoat systems
It can be prettied up.
Environmentally friendly, as it is based on dispersion.
It reliably stops the corrosion process and provides an optimal basis for further painting.
• The rust converter penetrates the rust, reacts with the rust and converts the iron oxides into a stable, insoluble, blue-black, metal-organic complex.
Warning
Processing information is a recommendation based on our tests and experience; Before each application, you should do your own tests. Due to the large number of applications and storage and processing conditions, we do not assume any responsibility for a specific processing result. To the extent that our free customer service provides technical information or acts as an advisor, this is done with the exclusion of any liability, unless the advice or information is part of our owed, contractually agreed scope of services or the advisor acted intentionally. We guarantee the constant quality of our products, we reserve the right to technical changes and further development.
