Hitro in varno nakupovanje
Brezplačna dostava po Sloveniji nad 100eur
Možnost vračila v 14 dneh
Description
310 ml
One-component polyurethane adhesive
One-component polyurethane adhesive without solvent content.
One-component polyurethane glue ICEMA R 145/44, 310ml, open time at a temperature of 20 degrees C is 15 minutes. It is used for assembly bonding of all types of wood, for bonding metals such as galvanized steel, precious steel, primed steel, aluminum, non-ferrous metals and plastic materials: DKS, GF-polyesters, hard PVC, ABS, SAN, PA, PC, PMMA, materials based on cement, ceramics and all common building materials. There is 310ml in the tube and it is applied with a silicone gun.
Instructions for use:
One-component polyurethane glue is applied directly from the tube or applied to the spatula. The surfaces must be clean and free of grease. If necessary, spray a mist of water on the glue to speed up drying. The pressing time depends on the temperature and humidity of the glued materials. Cleaning uncured glue with DEKOR 5000 cleaner, cured glue can only be removed mechanically. It is imperative to pay attention to cleanliness and accuracy when gluing.
Features:
- Color: white
- Viscosity: 140,000 ± 40,000 mPas
- Open time: approx. 15 min (with water mist 5 min)
- Pressing time: at + 20 °C approx. 30 min, at + 40 °C approx. 10 min, at + 60 °C approx. 5 min
One-component polyurethane adhesive
One-component polyurethane adhesive without solvent content.
One-component polyurethane glue ICEMA R 145/44, 310ml, open time at a temperature of 20 degrees C is 15 minutes. It is used for assembly bonding of all types of wood, for bonding metals such as galvanized steel, precious steel, primed steel, aluminum, non-ferrous metals and plastic materials: DKS, GF-polyesters, hard PVC, ABS, SAN, PA, PC, PMMA, materials based on cement, ceramics and all common building materials. There is 310ml in the tube and it is applied with a silicone gun.
Instructions for use:
One-component polyurethane glue is applied directly from the tube or applied to the spatula. The surfaces must be clean and free of grease. If necessary, spray a mist of water on the glue to speed up drying. The pressing time depends on the temperature and humidity of the glued materials. Cleaning uncured glue with DEKOR 5000 cleaner, cured glue can only be removed mechanically. It is imperative to pay attention to cleanliness and accuracy when gluing.
Features:
- Color: white
- Viscosity: 140,000 ± 40,000 mPas
- Open time: approx. 15 min (with water mist 5 min)
- Pressing time: at + 20 °C approx. 30 min, at + 40 °C approx. 10 min, at + 60 °C approx. 5 min