Hitro in varno nakupovanje
Brezplačna dostava po Sloveniji nad 100eur
Možnost vračila v 14 dneh
Description
Tekafix adhesive contains:
300 ml
FEATURES:
Tekafix adhesive is a two-component polyester-based adhesive for quick anchoring under most surfaces
stationary and less loaded conditions.
• Hardens quickly.
• Multipurpose, for indoor and outdoor use.
• Useful even at low temperatures, even down to -10°C, the cartridge is stored at 20°C.
• It can be applied with a conventional cartridge gun.
• Does not slip on vertical surfaces.
• Does not drip, can be used above the head.
• Temperature stable from -40°C to 80°C.
• Also suitable for filling holes and cracks.
• Excellent adhesion to all building materials.
• Economical glue, excellent ratio between quality and price.
FIELD OF USE:
• For gluing normally loaded anchors in walls, bricks and concrete.
• As a repair mortar or adhesive for concrete elements.
• As an adhesive for facade elements, wooden structures, metal structures, consoles,
fences, sanitary fittings and pipes.
• Tekafix adhesive does not swell during curing, so it is suitable for loads placed close to each other
edges of objects.
• It is used for structural bonding of reinforcing bars and installation of screws in the new one
constructed buildings or in the renovation of prefabricated concrete elements.
• It is suitable for fixing doors, fences, shutters, antennas, consoles, cable fittings and
industrial machines
Installation of anchors in massive materials - stone, concrete:
• The well is drilled with a percussive drill perpendicular to the surface.
• Clean the well well with a round brush that has a larger diameter than the well and blow it out with air.
• Unscrew the cap, pull the foil from the cartridge and cut it at the thread of the cartridge. On the cartridge
screw the static mixer well. Make sure both components are in the static mixer.
• Place the cartridge in the gun and start extruding. Tekafix adhesive is well mixed when it is
uniform gray color. The first 10 cm of the mass must not be used for anchoring.
• The borehole is filled from the bottom to the top.
• Fill about two-thirds of the hole, but make sure it's all filled
the space between the wall and the anchor and along the entire depth.
300 ml
Tekafix glue is used for gluing loaded anchors in stone, concrete, lightweight concrete and brick.
FEATURES:
Tekafix adhesive is a two-component polyester-based adhesive for quick anchoring under most surfaces
stationary and less loaded conditions.
• Hardens quickly.
• Multipurpose, for indoor and outdoor use.
• Useful even at low temperatures, even down to -10°C, the cartridge is stored at 20°C.
• It can be applied with a conventional cartridge gun.
• Does not slip on vertical surfaces.
• Does not drip, can be used above the head.
• Temperature stable from -40°C to 80°C.
• Also suitable for filling holes and cracks.
• Excellent adhesion to all building materials.
• Economical glue, excellent ratio between quality and price.
FIELD OF USE:
• For gluing normally loaded anchors in walls, bricks and concrete.
• As a repair mortar or adhesive for concrete elements.
• As an adhesive for facade elements, wooden structures, metal structures, consoles,
fences, sanitary fittings and pipes.
• Tekafix adhesive does not swell during curing, so it is suitable for loads placed close to each other
edges of objects.
• It is used for structural bonding of reinforcing bars and installation of screws in the new one
constructed buildings or in the renovation of prefabricated concrete elements.
• It is suitable for fixing doors, fences, shutters, antennas, consoles, cable fittings and
industrial machines
Installation of anchors in massive materials - stone, concrete:
• The well is drilled with a percussive drill perpendicular to the surface.
• Clean the well well with a round brush that has a larger diameter than the well and blow it out with air.
• Unscrew the cap, pull the foil from the cartridge and cut it at the thread of the cartridge. On the cartridge
screw the static mixer well. Make sure both components are in the static mixer.
• Place the cartridge in the gun and start extruding. Tekafix adhesive is well mixed when it is
uniform gray color. The first 10 cm of the mass must not be used for anchoring.
• The borehole is filled from the bottom to the top.
• Fill about two-thirds of the hole, but make sure it's all filled
the space between the wall and the anchor and along the entire depth.