Hitro in varno nakupovanje
Brezplačna dostava po Sloveniji nad 100eur
Možnost vračila v 14 dneh
Description
A vole trap works by sticking it into the ground, where it attracts voles and traps them in a gap.
Vole Trap - Safe, effective and easy to use
Easy setup in seconds: The vole trap is adjustable with a single upward pull of the handle.
A small amount of force is required to tension the mechanism - in contrast to other traps that require quite a lot of force to tension the spring.
It is not necessary to dig large holes for setting, as with other traps.
A possible catch is easily seen (noticed) - the handle falls back into the trap. The trap catches voles and field mice from both directions.
EASY TO USE
1. Insert the search rod (accessory) into the soil. When a passage is present, the search rod passes through with ease. Insert the trap in such a place that the passage is as upright and level as possible.
2. Use the hole cutter (accessory) to dig a clean hole with a diameter of 6 cm and 1-2 cm less than the depth where the trap will be inserted. Clean or trample the soil that falls into the hole.
3. Place the trap in the hole and carefully pull the clamp up so that the trap opening and the direction of entry are at the same height. Cover the trap with grass and leaves on the surface of the soil, preventing light and air from entering the hole itself.
Check the trap no later than one day later. In most cases, it only takes a few hours for an animal to be caught in a trap.
Accessory kit (search rod and hole cutter) available separately.
Vole Trap - Safe, effective and easy to use
Easy setup in seconds: The vole trap is adjustable with a single upward pull of the handle.
A small amount of force is required to tension the mechanism - in contrast to other traps that require quite a lot of force to tension the spring.
It is not necessary to dig large holes for setting, as with other traps.
A possible catch is easily seen (noticed) - the handle falls back into the trap. The trap catches voles and field mice from both directions.
EASY TO USE
1. Insert the search rod (accessory) into the soil. When a passage is present, the search rod passes through with ease. Insert the trap in such a place that the passage is as upright and level as possible.
2. Use the hole cutter (accessory) to dig a clean hole with a diameter of 6 cm and 1-2 cm less than the depth where the trap will be inserted. Clean or trample the soil that falls into the hole.
3. Place the trap in the hole and carefully pull the clamp up so that the trap opening and the direction of entry are at the same height. Cover the trap with grass and leaves on the surface of the soil, preventing light and air from entering the hole itself.
Check the trap no later than one day later. In most cases, it only takes a few hours for an animal to be caught in a trap.
Accessory kit (search rod and hole cutter) available separately.